Description
Mass Finishing has formulated RP-100 Water Soluble Rust Inhibitor as hard drying, bio-stable water-based rust preventative. It preents corrosion to ferrous, aluminum, copper, and galvanized metals. When properly applied in a small concentration, this Mass Finishing industrial rust inhibitor solution effectively reduces the corrosion rate of exposed metals.
RP-100 represents an innovative solution for industries seeking an environmentally friendly, reliable rust preventative. This water-based inhibitor is ideal for protecting metal surfaces without the hazards associated with traditional chemicals. Its unique formulation not only resists corrosion but also supports sustainable practices with its low environmental impact.
Below are the benefits of RP-100 water soluble rust inhibitor:
- Extremely low VOCs
- Leaves a thin, non-staining film that is dry to the touch
- Free from nitrites, phosphates and borates
- Completely soluble in water
- Excellent antimicrobial properties
- Protects ferrous and non-ferrous alloys
Applications:
Mass Finishing RP-100 Rust Inhibitor is formulated for use on most metal alloys. Typical concentration into water is 2-6% percent – but protection is highly dependent on water quality. The film is easily removed by alkaline cleaner.
Typical Properties:
Values are typical and may vary within normal production ranges
Product: RP-100
| Film Type | Dry |
| Inside Storage @2-6% concentration (months) | 3-6 |
| Specific Gravity | 1.02 |
| pH (neat) | 9.75 |
| pH (1% volume) | 9.25 |
