RF-100 Centrifugal Disc Finisher
RF-100 Centrifugal Disc Finishing Machine
The RF-100 Disc Finisher is an economical finishing machine. Like the RF-50, this model has the same great features as its counterparts, but with a larger tub size, higher horsepower, and greater capacity. The RF-100 requires manual loading and unloading and features a dumping system. Water and compound can be run continuously through the system, or it can be run as part of a batch process.
Capacity: 3 cu ft
Working Capacity: 2.1 cu ft
Overall L x W x H: 60″ x 40″ x 52″
Drum Size: 24″ x 15″
Motor: 5 HP
Weight: 1,215 lbs
Voltage: 230v or 460v
About the RF-100 Centrifugal Disc Finisher
Centrifugal disc finishing systems from MFI offer lower operating costs and a better finishing performance than vibratory finishers. The RF-Series can perform a wide range of deburring and polishing functions at 10 to 30 times the speed of vibratory finishers.
Standard Features
- Variable Frequency Drive
- Digital Process Timer
- Polyurethane Lined
- Upflow Drain System (water is pushed up thru disc gap & drains toward top of machine)
- Finish Cycle Buzzer
- Ideal Unload Height
- Convenient Operator Control Console
- Hydraulic Disc Unload
- Variable Process Timer
- Amp Meter
- RPM Meter
RF-100 Centrifugal Disc Basic Operation
To operate the RF-100 Centrifugal Disc Finisher, manually load the barrel with media, parts, and compound. Turn on the machine and set it to your desired speed. Then, drop in your parts and allow the machine to complete the cycle. Once the cycle is finished, press the “stop” button to stop the cycle. Position the recovery bin under the machine, and slowly tip the barrel to separate the parts from the media.
Are You Interested in the RF-100?